← Printer catalog · Slicer settings

Felix Pro 2 Touch

Felix Pro 2 Touch slicer settings

Recommended slicer settings for the Felix Pro 2 Touch (FELIXrobotics) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 237x244x235. Fused Deposition Modeling (FDM / FFF). Common slicers: Repetier Host или FelixBUILDER. Use these as a baseline and fine-tune for your filament brand and enclosure.

PLAPETGABS

Felix Pro 2 Touch slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
Felix Pro 2 Touch — ABS starting settings defaults ABS 250/100 150 mm/s 0-20 Repetier Host или FelixBUILDER
Felix Pro 2 Touch — PETG starting settings defaults PETG 240/80 150 mm/s 30-50 Repetier Host или FelixBUILDER
Felix Pro 2 Touch — PLA starting settings defaults PLA 210/60 150 mm/s 100 Repetier Host или FelixBUILDER
All settings files Print cost

Tech specs

Type Home
Brand FELIXrobotics
Сountry Netherlands
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 2
Print speed 30 – 150 mm / s
LCD Screen Yes
Print Area 237x244x235
Bed Heated
Material Stainless steel, Tool Steel, Aluminum alloys, Titanium alloy, Pure titanium, Cobalt-chrome alloys, Inconel
Material diameter 1.75
Host computer software Repetier Host или FelixBUILDER
Input method USB, Card Reader, WiFi
Machine size 237x244x235
weight, kg 11.5 kg

The Felix Pro 2 Touch is a home 3D printer manufactured by Netherlands-based FELIXrobotics. It is a Fused Deposition Modeling (FDM/FFF) printer that is equipped with two nozzles, an LCD screen, a heated bed, and supports a wide range of materials, from stainless steel to titanium. It prints with a speed of 30-150 mm/s and utilizes filament diameter of 1.75 mm. The printer’s size is 237x244x235 and has a weight of 11.5 kg. It can be connected via a USB, card reader, or WiFi. The host computer software used is Repetier Host or FelixBUILDER. General slicer settings for this 3D printer includes the infill percentage, printing temperature, supports and rafts, and the layer height.

More