← Printer catalog · Slicer settings

Evolution

Evolution slicer settings

Recommended slicer settings for the Evolution (Iprint Technologies Pty Ltd.) 3D printer. Profiles cover PLA, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 200х200х200. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.

PLAABS

Evolution slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
Evolution — ABS starting settings defaults ABS 250/100 38 mm/s 0-20 Cura
Evolution — PLA starting settings defaults PLA 210/60 38 mm/s 100 Cura
All settings files Print cost

Tech specs

Type Home
Brand Iprint Technologies Pty Ltd.
Сountry Australia
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 1
Print speed 38 mm / s
Print Area 200х200х200
Bed Without heated
Material ABS, PLA
Material diameter 1.75
Input method USB
Machine size 200х200х200
weight, kg 9.18 kg

The Evolution 3D Printer from Iprint Technologies Pty Ltd. is a home-based Fused Deposition Modeling (FDM / FFF) technology printer made in Australia. It has a single nozzle, with a print speed of 38 mm/s and a print area of 200x200x200. It has a non-heated bed and takes both ABS and PLA filament, with a filament diameter of 1.75. The printer is able to be connected to a host computer via USB. It has a weight of 9.18 kg and a size of 200x200x200. The general slicer settings for Evolution are designed to provide optimal printing quality.

More