3DSettings
← Printer catalog · Slicer settings
ENGINEER V2 slicer settings
Recommended slicer settings for the ENGINEER V2 (3Д-Эксперты) 3D printer. Profiles cover PLA, ABS, NYLON, HIPS, PVA with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 200х200х180. Fused Deposition Modeling (FDM / FFF). Common slicers: Свободно распространяемые программы проекта RepRap – RepetierHost, ProInterface, Slic3r, KISSlicer. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAABSNYLONHIPSPVA
ENGINEER V2 slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| ENGINEER V2 — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Свободно распространяемые программы проекта RepRap – RepetierHost |
| ENGINEER V2 — HIPS starting settings defaults | HIPS | 240/100 | vol 10 mm³/s | 20-40 | Свободно распространяемые программы проекта RepRap – RepetierHost |
| ENGINEER V2 — NYLON starting settings defaults | NYLON | 260/90 | vol 8 mm³/s | 0-30 | Свободно распространяемые программы проекта RepRap – RepetierHost |
| ENGINEER V2 — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Свободно распространяемые программы проекта RepRap – RepetierHost |
| ENGINEER V2 — PVA starting settings defaults | PVA | 210/60 | vol 6 mm³/s | 100 | Свободно распространяемые программы проекта RepRap – RepetierHost |
Tech specs
| Type | Home |
|---|---|
| Brand | 3Д-Эксперты |
| Сountry | Russia |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print Area | 200х200х180 |
| Bed | Heated |
| Material | ABS, PLA, PVA, Hips, Laybrick, Nylon, Laywoo-D3 |
| Material diameter | 1.75 |
| Host computer software | Свободно распространяемые программы проекта RepRap – RepetierHost, ProInterface, Slic3r, KISSlicer |
| Input method | USB |
| Machine size | 200х200х180 |
| weight, kg | 9 kg |