← Printer catalog · Slicer settings
Recommended slicer settings for the Engineer (Prusa i3) (3Д-Эксперты) 3D printer. Profiles cover PLA, PETG, ABS, TPU with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 200х200х180. Fused Deposition Modeling (FDM / FFF). Common slicers: Свободно распространяемые программы проекта RepRap – RepetierHost, ProInterface, Slic3r, KISSlicer. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABSTPU
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Engineer (Prusa i3) — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Свободно распространяемые программы проекта RepRap – RepetierHost |
| Engineer (Prusa i3) — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | Свободно распространяемые программы проекта RepRap – RepetierHost |
| Engineer (Prusa i3) — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Свободно распространяемые программы проекта RepRap – RepetierHost |
| Engineer (Prusa i3) — TPU starting settings defaults | TPU | 230/40 | vol 3 mm³/s | 50-80 | Свободно распространяемые программы проекта RepRap – RepetierHost |
| Type | Home |
|---|---|
| Brand | 3Д-Эксперты |
| Сountry | Russia |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print Area | 200х200х180 |
| Bed | Heated |
| Material | ABS, PLA, Petg, TPU, ABS + |
| Material diameter | 3 |
| Host computer software | Свободно распространяемые программы проекта RepRap – RepetierHost, ProInterface, Slic3r, KISSlicer |
| Input method | USB |
| Machine size | 200х200х180 |
| weight, kg | 9 kg |
The 3Д-Эксперты Engineer Prusa i3 is a home FDM 3D printer manufactured in Russia. It has one nozzle, a heated bed, and a print area of 200 x 200 x 180 mm. It is compatible with ABS, PLA, Petg, TPU, and ABS+. It’s input method is a USB. It weighs 9 kg and has a size of 200 x 200 x 180 mm. The host computer software is the free programs from the RepRap project, including RepetierHost, ProInterface, Slic3r, and KISSlicer. The general slicer settings for the Prusa i3 are found in the manual.
3DSettings