3DSettings
This Tech Spec and Parameters table provides information on the type, brand, country, print technology, nozzle quantity, print speed, LCD Screen, print area, bed, material, material diameter, host computer software, input method, machine size, and weight of the Shining 3D Einstart-S Home 3D printer. The general slicer settings for this printer are not specified in this table.
← Printer catalog · Slicer settings
Einstart-S slicer settings
Recommended slicer settings for the Einstart-S (Shining 3D) 3D printer. Profiles cover PLA, PETG, ABS, TPU with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 160х160х160. Fused Deposition Modeling (FDM / FFF). Common slicers: 3D START 1.3. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABSTPU
Einstart-S slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Einstart-S — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | 3D START 1.3 |
| Einstart-S — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | 3D START 1.3 |
| Einstart-S — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | 3D START 1.3 |
| Einstart-S — TPU starting settings defaults | TPU | 230/40 | vol 3 mm³/s | 50-80 | 3D START 1.3 |
Tech specs
| Type | Home |
|---|---|
| Brand | Shining 3D |
| Сountry | China |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 24 cm3 / hour |
| LCD Screen | Yes |
| Print Area | 160х160х160 |
| Bed | Without heated |
| Material | ABS, PLA, Petg, TPU |
| Host computer software | 3D START 1.3 |
| Input method | USB, Card Reader |
| Machine size | 160х160х160 |
| weight, kg | 9.800000000000001 kg |