← Printer catalog · Slicer settings

Wanhao Duplicator 4S

Wanhao Duplicator 4S slicer settings

Recommended slicer settings for the Wanhao Duplicator 4S (WANHAO) 3D printer. Profiles cover ABS, ASA, NYLON, PC, HIPS, PVA, TPU with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 225х145х150. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.

ABSASANYLONPCHIPSPVATPU

Wanhao Duplicator 4S slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
Wanhao Duplicator 4S — ABS starting settings defaults ABS 250/100 40 mm/s 0-20 Cura
Wanhao Duplicator 4S — ASA starting settings defaults ASA 250/100 40 mm/s 0-20 Cura
Wanhao Duplicator 4S — HIPS starting settings defaults HIPS 240/100 40 mm/s 20-40 Cura
Wanhao Duplicator 4S — NYLON starting settings defaults NYLON 260/90 40 mm/s 0-30 Cura
Wanhao Duplicator 4S — PC starting settings defaults PC 270/110 40 mm/s 0-20 Cura
Wanhao Duplicator 4S — PVA starting settings defaults PVA 210/60 40 mm/s 100 Cura
Wanhao Duplicator 4S — TPU starting settings defaults TPU 230/40 40 mm/s 50-80 Cura
All settings files Print cost

Tech specs

Type Home
Brand WANHAO
Сountry China
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 2
Print speed 40 mm / s
LCD Screen Yes
Print Area 225х145х150
Bed Heated
Material ABS, PVA, Hips, Nylon, PC, ASA, Flex, Peek, Rubber, SBS
Material diameter 1.75
Input method USB, Card Reader
Machine size 225х145х150
weight, kg 12 kg

The Wanhao Duplicator 4S is a home 3D printer made by WANHAO. It is equipped with a Fused Deposition Modeling (FDM / FFF) print technology, 2 nozzles, a 40 mm/s print speed, a heated bed, an LCD Screen and an input method of USB and Card Reader. It is compatible with ABS, PVA, HIPS, Nylon, PC, ASA, Flex, Peek, Rubber and SBS, and a material diameter of 1.75 mm. The weight of the machine is 12 kg and its size is 225 x 145 x 150. General slicer settings include layer height, infill density, print speed, temperature, fan speed and many more.

More