← Printer catalog · Slicer settings

Ditto Pr

Ditto Pr slicer settings

Recommended slicer settings for the Ditto Pr (Tinkerine Studio Ltd) 3D printer. Profiles cover PLA, PETG, ABS, TPU with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 210x185x230. Fused Deposition Modeling (FDM / FFF). Common slicers: Tinkerine Suite Типы файлов: STL, OBJ. Use these as a baseline and fine-tune for your filament brand and enclosure.

PLAPETGABSTPU

Ditto Pr slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
Ditto Pr — ABS starting settings defaults ABS 250/100 vol 11 mm³/s 0-20 Tinkerine Suite Типы файлов: STL
Ditto Pr — PETG starting settings defaults PETG 240/80 vol 12 mm³/s 30-50 Tinkerine Suite Типы файлов: STL
Ditto Pr — PLA starting settings defaults PLA 210/60 vol 15 mm³/s 100 Tinkerine Suite Типы файлов: STL
Ditto Pr — TPU starting settings defaults TPU 230/40 vol 3 mm³/s 50-80 Tinkerine Suite Типы файлов: STL
All settings files Print cost

Tech specs

Type Home
Brand Tinkerine Studio Ltd
Сountry Canada
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 1
LCD Screen Yes
Print Area 210x185x230
Bed Without heated
Material ABS, PLA, Petg, SBS, TPU
Material diameter 1.75
Host computer software Tinkerine Suite Типы файлов: STL, OBJ
Input method USB, Card Reader
Machine size 210x185x230
weight, kg 7 kg

This technical specification describes a 3D printer designed by Tinkerine Studios Ltd. in Canada. It is a home printer and uses Fused Deposition Modeling (FDM / FFF) technology. It has one nozzle with a print speed of unknown and the print area is 210x185x230. The bed is not heated and it can be used with ABS, PLA, PetG, SBS, and TPU materials with a diameter of 1.75 mm. It can be controlled through the Tinkerine Suite software, has an LCD screen, and can be connected with a USB or card reader. Its machine size is 210x185x230 and it weighs 7 kg. It comes with some general slicer settings for Ditto Pr.

More