← Printer catalog · Slicer settings
Recommended slicer settings for the Deltabot Dualhead (D-Force) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 300*265*265. Fused Deposition Modeling (FDM / FFF). Common slicers: Repetier Host. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Deltabot Dualhead — ABS starting settings defaults | ABS | 250/100 | 300 mm/s | 0-20 | Repetier Host |
| Deltabot Dualhead — PETG starting settings defaults | PETG | 240/80 | 300 mm/s | 30-50 | Repetier Host |
| Deltabot Dualhead — PLA starting settings defaults | PLA | 210/60 | 300 mm/s | 100 | Repetier Host |
| Type | Home |
|---|---|
| Brand | D-Force |
| Сountry | China |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 300 mm / s |
| LCD Screen | Yes |
| Print Area | 300*265*265 |
| Bed | Heated |
| Material diameter | 1.75 |
| Host computer software | Repetier Host |
| Input method | USB, Card Reader |
| Machine size | 300*265*265 |
| weight, kg | kg |
The D-Force DeltaBot Dualhead is a home 3D printer made in China. It uses Fused Deposition Modeling (FDM/FFF) as its printing technology and has a single nozzle. It has a print speed of 300 mm/s, an LCD screen, and a heated bed. It has an input method of USB and Card Reader. Its machine size is 300 x 265 x 265 cm, and it does not specify its weight in kg. The host computer software for this printer is Repetier Host. The general slicer settings for this printer are not specified.
3DSettings