3DSettings
← All settings Official Bambu
Bambu Support G @BBL A1
Bambu Lab A1 · PA · Bambu Studio
Original profile: Bambu Support G @BBL A1 · AGPL-3.0
Brief settings
- Nozzle °C 280
- Bed °C 100
- Fan min % 0
- Fan max % 60
- Max volumetric mm³/s 8
- Filament type PA
When to use
- Engineering filament: dry thoroughly and prefer a warm chamber when possible.
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: Bambu Support G @BBL A1
Inheritance: Bambu Support G @BBL A1 → Bambu Support G @base → fdm_filament_pa → fdm_filament_common
Max volumetric speed: 8 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | Bambu Support G @BBL A1 |
|---|---|
| Filament type | PA |
| Vendor | Bambu Lab |
| Nozzle °C | 280 |
| Nozzle min °C | 260 |
| Nozzle max °C | 300 |
| Nozzle °C (1st layer) | 280 |
| Bed °C (hot plate) | 100 |
| Bed °C (1st layer) | 100 |
| Bed °C (cool plate) | 0 |
| Bed °C (engineering plate) | 100 |
| Bed °C (textured) | 100 |
| Fan min % | 0 |
| Fan max % | 60 |
| Fan cooling layer time (s) | 10 |
| No fan for first layers | 3 |
| Max volumetric (mm³/s) | 8 |
| Flow ratio | 1 |
| Density (g/cm³) | 1.22 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 6 |
| Slow down min speed | 20 |
| Overhang fan % | 30 |
| Compatible printers | Bambu Lab A1 0.4 nozzle, Bambu Lab A1 0.6 nozzle, Bambu Lab A1 0.8 nozzle |
| Aux cooling fan % | 0 |
| Air filtration | 1 |
| Exhaust fan % | 70 |
| Chamber °C | 0 |