3DSettings
← All settings Official Bambu
PolyLite ASA @BBL X1C
Bambu Lab X1 Carbon · ASA · Bambu Studio
Original profile: PolyLite ASA @BBL X1C · AGPL-3.0
Brief settings
- Nozzle °C 260
- Bed °C 100
- Fan min % 10
- Fan max % 80
- Max volumetric mm³/s 13
- Filament type ASA
When to use
- Use an enclosure; keep drafts away to reduce warping and layer splits.
- Dry the spool if prints look fuzzy or weak (ASA/ABS are hygroscopic).
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: PolyLite ASA @BBL X1C
Inheritance: PolyLite ASA @BBL X1C → PolyLite ASA @base → fdm_filament_asa → fdm_filament_common
Max volumetric speed: 13 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | PolyLite ASA @BBL X1C |
|---|---|
| Filament type | ASA |
| Vendor | Polymaker |
| Nozzle °C | 260, 260 |
| Nozzle min °C | 240 |
| Nozzle max °C | 280 |
| Nozzle °C (1st layer) | 260, 260 |
| Bed °C (hot plate) | 100 |
| Bed °C (1st layer) | 100 |
| Bed °C (cool plate) | 0 |
| Bed °C (engineering plate) | 100 |
| Bed °C (textured) | 100 |
| Fan min % | 10 |
| Fan max % | 80 |
| Fan cooling layer time (s) | 35 |
| No fan for first layers | 3 |
| Max volumetric (mm³/s) | 13, 13 |
| Flow ratio | 0.95 |
| Density (g/cm³) | 1.02 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 3 |
| Slow down min speed | 20, 20 |
| Overhang fan % | 80 |
| Compatible printers | Bambu Lab X1 Carbon 0.4 nozzle, Bambu Lab X1 0.4 nozzle, Bambu Lab X1 0.8 nozzle, Bambu Lab X1 0.6 nozzle, Bambu Lab X1 Carbon 0.6 nozzle, Bambu Lab X1 Carbon 0.8 nozzle, Bambu Lab P1S 0.4 nozzle, Bambu Lab P1S 0.6 nozzle, Bambu Lab P1S 0.8 nozzle |
| Aux cooling fan % | 0 |
| Air filtration | 1 |
| Exhaust fan % | 70 |
| Chamber °C | 0 |