3DSettings
← All settings Official Bambu
Generic PA-CF @BBL P1P
Bambu Lab P1P · PA-CF · Bambu Studio
Original profile: Generic PA-CF @BBL P1P · AGPL-3.0
Brief settings
- Nozzle °C 290
- Bed °C 100
- Fan min % 10
- Fan max % 30
- Max volumetric mm³/s 8
- Filament type PA-CF
When to use
- Engineering filament: dry thoroughly and prefer a warm chamber when possible.
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: Generic PA-CF @BBL P1P
Inheritance: Generic PA-CF @BBL P1P → Generic PA-CF @base → fdm_filament_pa → fdm_filament_common
Max volumetric speed: 8 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | Generic PA-CF @BBL P1P |
|---|---|
| Filament type | PA-CF |
| Vendor | Generic |
| Nozzle °C | 290, 290 |
| Nozzle min °C | 260 |
| Nozzle max °C | 300 |
| Nozzle °C (1st layer) | 290, 290 |
| Bed °C (hot plate) | 100 |
| Bed °C (1st layer) | 100 |
| Bed °C (cool plate) | 0 |
| Bed °C (engineering plate) | 100 |
| Bed °C (textured) | 100 |
| Fan min % | 10 |
| Fan max % | 30 |
| Fan cooling layer time (s) | 5 |
| No fan for first layers | 3 |
| Max volumetric (mm³/s) | 8, 8 |
| Flow ratio | 1, 1 |
| Density (g/cm³) | 1.04 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 2 |
| Slow down min speed | 20, 20 |
| Overhang fan % | 40 |
| Compatible printers | Bambu Lab P1P 0.4 nozzle, Bambu Lab P1P 0.6 nozzle, Bambu Lab P1P 0.8 nozzle |
| Aux cooling fan % | 0 |
| Air filtration | 1 |
| Exhaust fan % | 70 |
| Chamber °C | 0 |