3DSettings
The Da Vinci Minimaker is a home 3D printer made by XYZprinting in Taiwan. It uses Fused Deposition Modeling (FDM / FFF) technology with one nozzle, and no heated bed. The machine size is 150х150х150 mm, weight is 11.5 kg, and it can print with Photopolymer resin with a 1.75 mm diameter. The host computer software is XYZware, which is connected by USB. Its print area is 150х150х150 mm.
← Printer catalog · Slicer settings
Da Vinci Minimaker slicer settings
Recommended slicer settings for the Da Vinci Minimaker (XYZprinting) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 150х150х150. Fused Deposition Modeling (FDM / FFF). Common slicers: XYZware. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Da Vinci Minimaker slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Da Vinci Minimaker — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | XYZware |
| Da Vinci Minimaker — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | XYZware |
| Da Vinci Minimaker — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | XYZware |
Tech specs
| Type | Home |
|---|---|
| Brand | XYZprinting |
| Сountry | Taiwan |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print Area | 150х150х150 |
| Bed | Without heated |
| Material | Photopolymer resin |
| Material diameter | 1.75 |
| Host computer software | XYZware |
| Input method | USB |
| Machine size | 150х150х150 |
| weight, kg | 11.5 kg |