← Printer catalog · Slicer settings
Recommended slicer settings for the DA VINCI JR 10 (XYZprinting) 3D printer. Profiles cover PLA, PETG, ABS, ASA, NYLON, HIPS, PVA, TPU with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 150x150x150. Fused Deposition Modeling (FDM / FFF). Common slicers: XYZware. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABSASANYLONHIPSPVATPU
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| DA VINCI JR 10 — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | XYZware |
| DA VINCI JR 10 — ASA starting settings defaults | ASA | 250/100 | vol 11 mm³/s | 0-20 | XYZware |
| DA VINCI JR 10 — HIPS starting settings defaults | HIPS | 240/100 | vol 10 mm³/s | 20-40 | XYZware |
| DA VINCI JR 10 — NYLON starting settings defaults | NYLON | 260/90 | vol 8 mm³/s | 0-30 | XYZware |
| DA VINCI JR 10 — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | XYZware |
| DA VINCI JR 10 — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | XYZware |
| DA VINCI JR 10 — PVA starting settings defaults | PVA | 210/60 | vol 6 mm³/s | 100 | XYZware |
| DA VINCI JR 10 — TPU starting settings defaults | TPU | 230/40 | vol 3 mm³/s | 50-80 | XYZware |
| Type | Home |
|---|---|
| Brand | XYZprinting |
| Сountry | Taiwan |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| LCD Screen | Yes |
| Print Area | 150x150x150 |
| Bed | Without heated |
| Material | ABS, PLA, PVA, Hips, Nylon, ASA, Flex, Petg, SBS |
| Material diameter | 1.75 |
| Host computer software | XYZware |
| Input method | USB, Card Reader |
| Machine size | 150x150x150 |
| weight, kg | 15 kg |
This is a Tech Spec and Parameters summary for XYZprinting’s Home Fused Deposition Modeling (FDM / FFF) 3D printer. It has a 1 nozzle, LCD screen, bed without heated, and 150x150x150mm print area. It supports a wide range of materials at a 1.75mm diameter, such as ABS, PLA, PVA, Hips, Nylon, ASA, Flex, Petg, and SBS. It uses the XYZware host computer software and can be connected via USB or card reader. The printer has a size of 150x150x150mm and weighs 15kg.
3DSettings