3DSettings
This Summary is about the Tech Spec and Parameters for the D-Master. It is a Home type printer made by the brand Shenzhen WeisTek Co.,Ltd in China. It uses Fused Deposition Modeling (FFM/FFF). It has 1 nozzle, LCD screen and an input method of USB. The print area is 150х150х145 and it has a weight of 14kg. The material used is COBALT-CHROME COCR, Stainless Steel 17-4Ph, ALUMINUM ALLOY ALSI12 and Maragoning Steel. It uses the Host computer software ReplicatorG. The general slicer settings for the printer are also described.
← Printer catalog · Slicer settings
D-Master slicer settings
Recommended slicer settings for the D-Master (Shenzhen WeisTek Co.,Ltd) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 150х150х145. Fused Deposition Modeling (FDM / FFF). Common slicers: ReplicatorG. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
D-Master slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| D-Master — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | ReplicatorG |
| D-Master — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | ReplicatorG |
| D-Master — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | ReplicatorG |
Tech specs
| Type | Home |
|---|---|
| Brand | Shenzhen WeisTek Co.,Ltd |
| Сountry | China |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| LCD Screen | Yes |
| Print Area | 150х150х145 |
| Bed | Without heated |
| Material | COBALT-CHROME COCR, Stainless Steel 17-4Ph, ALUMINUM ALLOY ALSI12, Maragoning Steel |
| Host computer software | ReplicatorG |
| Input method | USB |
| Machine size | 150х150х145 |
| weight, kg | 14 kg |