← Printer catalog · Slicer settings
Recommended slicer settings for the Cannonball Allstar (Iprint Technologies Pty Ltd.) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 200х200х120. Fused Deposition Modeling (FDM / FFF). Common slicers: Repsnapper. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Cannonball Allstar — ABS starting settings defaults | ABS | 250/100 | 38 mm/s | 0-20 | Repsnapper |
| Cannonball Allstar — PETG starting settings defaults | PETG | 240/80 | 38 mm/s | 30-50 | Repsnapper |
| Cannonball Allstar — PLA starting settings defaults | PLA | 210/60 | 38 mm/s | 100 | Repsnapper |
| Type | Home |
|---|---|
| Brand | Iprint Technologies Pty Ltd. |
| Сountry | Australia |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 2 |
| Print speed | 38 mm / s |
| Print Area | 200х200х120 |
| Bed | Without heated |
| Material | Photopolymer resin |
| Material diameter | 3 |
| Host computer software | Repsnapper |
| Input method | USB |
| Machine size | 200х200х120 |
| weight, kg | 11.5 kg |
The Cannonball Allstar 3D printer from Iprint Technologies Pty Ltd. has a type of home, is produced in Australia, and has two nozzles with a fused deposition modeling (FDM / FFF) technology. Its print speed is up to 38 mm/s, its printing area is 200x200x120mm, and its Bed is without heated. The material it uses is photopolymer resin with a diameter of 3mm. It uses Repsnapper host computer software and its input method is USB. It also has an 11.5 kg weight and measures 200x200x120mm.
3DSettings