3DSettings
This Tech specs and Parameters article provides general information about the Builder Extreme 1000 3D printer, designed and manufactured by Builder 3D Printers of the Netherlands. This commercial printer uses Fused Deposition Modeling (FDM/FFF) technology, has 1 nozzle, an LCD Screen, a heated bed, and can accept materials such as ABS, PLA, Nylon, Laywoo-D3. It can produce prints on a 700x700x820 area at speeds of 10-80 mm/s, and has a weight of 225kg. The input is done using a card reader or WiFi and the machine is compatible with Simplify 3D software.
← Printer catalog · Slicer settings
Builder Extreme 1000 slicer settings
Recommended slicer settings for the Builder Extreme 1000 (Builder 3D Printers) 3D printer. Profiles cover PLA, ABS, NYLON with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 700x700x820. Fused Deposition Modeling (FDM / FFF). Common slicers: Simplify 3D. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAABSNYLON
Builder Extreme 1000 slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Builder Extreme 1000 — ABS starting settings defaults | ABS | 250/100 | 80 mm/s | 0-20 | Simplify 3D |
| Builder Extreme 1000 — NYLON starting settings defaults | NYLON | 260/90 | 80 mm/s | 0-30 | Simplify 3D |
| Builder Extreme 1000 — PLA starting settings defaults | PLA | 210/60 | 80 mm/s | 100 | Simplify 3D |
Tech specs
| Type | Commercial |
|---|---|
| Brand | Builder 3D Printers |
| Сountry | Netherlands |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 10-80 mm / s |
| LCD Screen | Yes |
| Print Area | 700x700x820 |
| Bed | Heated |
| Material | ABS, PLA, Nylon, Laywoo-D3 |
| Material diameter | 1.75 |
| Host computer software | Simplify 3D |
| Input method | Card Reader, WiFi |
| Machine size | 700x700x820 |
| weight, kg | 225 kg |