← Printer catalog · Slicer settings

Buildabot Revolution

Buildabot Revolution slicer settings

Recommended slicer settings for the Buildabot Revolution (York3dPrinters) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 210х210х160. Fused Deposition Modeling (FDM / FFF). Common slicers: Cura Операционная система: Windows, Mac или Linux *. Use these as a baseline and fine-tune for your filament brand and enclosure.

PLAPETGABS

Buildabot Revolution slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
Buildabot Revolution — ABS starting settings defaults ABS 250/100 vol 11 mm³/s 0-20 Cura Операционная система: Windows
Buildabot Revolution — PETG starting settings defaults PETG 240/80 vol 12 mm³/s 30-50 Cura Операционная система: Windows
Buildabot Revolution — PLA starting settings defaults PLA 210/60 vol 15 mm³/s 100 Cura Операционная система: Windows
All settings files Print cost

Tech specs

Type Home
Brand York3dPrinters
Сountry Great Britain
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 1
Print Area 210х210х160
Bed Heated
Material E-Shell 200 m, E-Shell 300 m, E-Shell 600 m, E-Shell 3000 m, E-Silicone
Material diameter 1.75
Host computer software Cura Операционная система: Windows, Mac или Linux *
Input method USB
Machine size 210х210х160
weight, kg 10 kg

This table provides detailed information about the Buildabot Revolution 3D printer, which is a home printer produced by the Britsh brand York3dPrinters. It features a Fused Deposition Modeling (FDM/ FFF) interface and uses 1 nozzle to 3D print the materials. It has a heated bed and the materials it can print include E-Shell 200 m, E-Shell 300 m, E-Shell 600 m, E-Shell 3000 m and E-Silicone. It has a machine size of 210 x 210 x 160, weighs 10 kg and the material diameter it can handle is 1.75. The input method is USB and the host computer software is Cura, with Windows, Mac and Linux as supported Operating Systems. Further, some general slicer settings are also provided.

More