← Printer catalog · Slicer settings

The beast

The beast slicer settings

Recommended slicer settings for the The beast (ZVER 3D) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 450х530х750. Fused Deposition Modeling (FDM / FFF). Common slicers: Любое доступное. Use these as a baseline and fine-tune for your filament brand and enclosure.

PLAPETGABS

The beast slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
The beast — ABS starting settings defaults ABS 250/100 180 mm/s 0-20 Любое доступное
The beast — PETG starting settings defaults PETG 240/80 180 mm/s 30-50 Любое доступное
The beast — PLA starting settings defaults PLA 210/60 180 mm/s 100 Любое доступное
All settings files Print cost

Tech specs

Type Commercial
Brand ZVER 3D
Сountry Russia
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 2
Print speed 180 mm / s
LCD Screen Yes
Print Area 450х530х750
Bed Heated
Material Photopolymer resin
Material diameter 1.75
Host computer software Любое доступное
Input method USB, Card Reader
Machine size 450х530х750
weight, kg kg

This article describes the tech specs and parameters of the ZVER 3D commercial 3D printer and its general slicer settings. The ZVER 3D is a Fused Deposition Modeling (FDM) printer from Russia with 2 nozzles, a print speed of 180 mm/sec, and a 450x530x750 print area. It has an LCD screen and a heated bed, and can use photopolymer resin with a 1.75mm material diameter. The host computer software can be any available and the input methods include USB and card reader. The machine size is 450x530x750 and weighs kg.

More