3DSettings
Anet A4 is a 3D printer made by Shenzhen Anet Technology Co Ltd, located in China. It uses Fused Deposition Modeling (FDM / FFF) printing technology, with a single nozzle and a heated bed. The print area is 200x200x210, and it can run at speeds between 30 and 100 mm per second. It has an LCD screen, a USB input and a card reader for reading in prints. The machine is 200x200x210 in size, and weighs about kg. Its material is photopolymer resin with a diameter of 1.75. Software for the host computer is not included. Settings for the slicer software depends on the particular printer and the objects to be printed.
← Printer catalog · Slicer settings
Anet A4 slicer settings
Recommended slicer settings for the Anet A4 (Shenzhen Anet Technology Co Ltd) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 200x200x210. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Anet A4 slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Anet A4 — ABS starting settings defaults | ABS | 250/100 | 100 mm/s | 0-20 | Cura |
| Anet A4 — PETG starting settings defaults | PETG | 240/80 | 100 mm/s | 30-50 | Cura |
| Anet A4 — PLA starting settings defaults | PLA | 210/60 | 100 mm/s | 100 | Cura |
Tech specs
| Type | Home |
|---|---|
| Brand | Shenzhen Anet Technology Co Ltd |
| Сountry | China |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 30-100 mm / s |
| LCD Screen | Yes |
| Print Area | 200x200x210 |
| Bed | Heated |
| Material | Photopolymer resin |
| Material diameter | 1.75 |
| Input method | USB, Card Reader |
| Machine size | 200x200x210 |
| weight, kg | kg |